Vector Realtime Condition
Insulator attachment cannot be performed.
Check whether Straight Line Tower or Tension Tower has been selected as the tower type in the tower list.
Conductors cannot be generated in a batch based on insulators.
Check whether the conductors and shield wires have been classified.
Check whether there are missed or duplicate insulator attachments.
If you only need to generate simulated conductors in a batch for a few sections of data, check whether the data falls within a complete tension section.
Check whether the tower type has been selected correctly.
Check whether the tower name numbers correspond one-to-one with the naming of the clipped point cloud data.
Suspension points are recognized incorrectly when vector lines are generated automatically.
Check the insulator attachment points and adjust them to the proper positions.
After misalignment occurs, delete the vector lines manually and use "Fit a Single Power Line Based on Insulators" to fit them again.
Conductors generated in a batch based on insulators deviate from the conductors in the point cloud.
Check the insulator attachment points and adjust them to the proper positions.
Check the data quality. If the conductor class point cloud is sparse or missing, it will affect the automatic batch fitting of conductors. In that case, use the "Fit a Single Power Line Based on Insulators" function to manually select the insulators and conductor attachment points to fit the vector line.